P17 HUD OBD2 GPS On-board Computer Car Electronics Accessories Head Up Display Vehicle Speed Voltage With Overspeed Alarm Gauge
SPECIFICATIONS
Brand Name: NONE
Choice: yes
High-concerned chemical: None
Origin: Mainland China
Output Frequency: 150mA
Rated Power: 1.8W
Size Name: 3.5inch
Speed type: OBD vehicle speed，GPS speed
Wire or Wireless: Wired
overspeed alarm: low voltage alarm
satellite time: altitude
speed: voltage
OBD2 mode function:
Vehicle speed, water temperature, voltage, fuel consumption, rotational speed, single time, single mileage, single driving time, total mileage time, intake pressure, oil temperature, air-fuel ratio, turbine pressure, intake pressure, clearing fault codes, reading data stream.
Alarm: Overspeed alarm, speed alarm, water temperature alarm, voltage alarm.
GPS mode function:
Vehicle speed, voltage, satellite time, altitude, satellite quantity, driving direction, single time, single mileage, single time, acceleration test, brake test
Alarm: Overspeed alarm, low voltage alarm
Time Calibration
The HUD will automatically update the time after connecting to the satellite. Please move the car to a place with strong signal. The first satellite search time is 3-5 minutes.
The default is China time. Please adjust it to your local time in the system settings and save and exit.
FAQs for OBD System
1.No display on the screen and no power
1)Check if the OBD cable is properly connected (for tightness/looseness).
2)Test with another car. If the other car works normally, the car’s OBD diagnostic port may be broken.
2.After powering on, it shows “OBD signal not detected”
1) An OBD cable must be used in OBD system mode.
2) Only applicable to OBDII and EOBD cars (OBDII and EOBD have been used since 2008). This product does not support OBD I or JOBD.
3) If OBD is not compatible, switch to GPS mode or use a USB cable directly.
Package:
1X Head up Display
1XOBD line
1XUSB wire
1X instruction manual
